errantember (![[personal profile]](https://www.dreamwidth.org/img/silk/identity/user.png)
errantember) wrote2009-03-16 03:11 am
errantember) wrote2009-03-16 03:11 am
Entry tags:
WARNING: One user serviceable part inside
The charger for my electric scooter stopped working after coming home in the rain the other night. After talking to ![[livejournal.com profile]](https://www.dreamwidth.org/img/external/lj-userinfo.gif)
trippedbreaker to narrow down the possibilities, and confirming that the warranty had run out, I decided to take it apart to see if the problem was something obvious. Of the hundred or so components inside, it turns out the one that was broken was very obvious and fairly easy to fix. A coil had pulled out of the board on one side. I tried re-soldering the stub, but it was too short to fit through the board, so I ended up pulling one coil of the 50 or so off to lengthen the wire, soldered it in place, tried it, saw it didn't work, un-soldered it, stripped off the insulation on the wire, then re-soldered it, all in under two hours.
Now it works. :)
trippedbreaker to narrow down the possibilities, and confirming that the warranty had run out, I decided to take it apart to see if the problem was something obvious. Of the hundred or so components inside, it turns out the one that was broken was very obvious and fairly easy to fix. A coil had pulled out of the board on one side. I tried re-soldering the stub, but it was too short to fit through the board, so I ended up pulling one coil of the 50 or so off to lengthen the wire, soldered it in place, tried it, saw it didn't work, un-soldered it, stripped off the insulation on the wire, then re-soldered it, all in under two hours.Now it works. :)